← Back to blog Cybersecurity

Critical Linux TCP flaw (CVSS 9.8) with remote code execution: what to patch today on the servers, NAS, firewalls and IoT gateways of your Mexico operation

4 min read

On November 3, 2026, Red Hat released patches for a flaw in how the Linux kernel handles TCP. It is rated 9.8 out of 10 and allows remote code execution: someone can run whatever they want on your server with no username or password. Ubuntu put its fixes out for testing the same day, as reported by The Hacker News.

That same day brought a second one: active exploitation of a critical flaw in Siemens IoT2050 industrial gateways, used to plant backdoors that take remote commands. If your Mexico plant or warehouse has anything that talks to sensors, this one is yours too.

9.8 out of 10: remote code execution in the Linux kernel TCP stack
Nov 3 Red Hat shipped patches; Ubuntu released its fixes for testing
Active exploitation of Siemens IoT2050 gateways reported the same day

Linux TCP flaw: what happened, in plain words

One crafted packet and they are in The flaw lives in the kernel, the core of the system. It does not matter what application runs on top: if the port answers the internet, it is exposed.

TCP is the protocol almost everything on a network travels on: the website, email, the shared folder, the camera in the parking lot. The kernel is the part of Linux that receives those packets before any program sees them.

A flaw there means an attacker sends crafted packets to an open port and takes over the device. No password guessing, nobody has to click anything.

In our experience, the damage is not the flaw itself. It is the gap between the patch coming out and the day someone installs it, at a site where nobody owns that job.

“Linux” is not just the server in the IT room

Inventory first, patch second You cannot patch what you do not know you have. A typical Mexico site turns up five to ten devices running Linux that nobody ever listed.

When headquarters hears Linux, it pictures the box in the server room. But Linux also runs on things nobody in Mexico thinks of patching:

DeviceWhere it sits in your Mexico siteWhat to do today
Red Hat, Rocky, Alma, Ubuntu serversERP, database, internal webPatch today, reboot in a window
Synology or QNAP NASThe one accounting uses, the backup boxRemove direct internet access, wait for firmware
Firewall or routerThe box that gives everyone internetCheck the vendor advisory, close remote admin
cPanel hostingThe Mexican website and emailAsk the provider when they patch
Issabel or similar PBXThe phone system many Mexican offices runZero ports open to the internet, VPN only
Cameras and NVRParking lot, warehouse, front deskIsolate on their VLAN, wait for firmware
IoT and LoRa gatewaysPlant sensors, Siemens, MilesightCheck firmware and pull them off the internet now

Servers get patched today. Everything else depends on the vendor, and that wait can run for weeks. Meanwhile, the defense is making sure those devices cannot be seen from the internet.

Checklist: what to patch today and in what order

Start with what is visible from outside A device with a port exposed to the internet is worth ten times more to an attacker than one hidden behind the VPN.
  1. Inventory what exposes TCP to the internet. An external scan of the public IPs of your Mexico sites tells you in minutes. The ports you did not know were open are the worrying ones.
  2. Patch Red Hat, Rocky, Alma and Ubuntu today. If Ubuntu still has the fix in testing, apply whatever mitigation it publishes and keep the server behind the firewall.
  3. Ask the NAS, firewall, camera and gateway vendors for firmware. Subscribe to their security advisories instead of waiting for someone to tell you.
  4. Until it arrives, close ports and segment. No device administration from the internet: VPN only. Put cameras, IoT and the plant floor on their own VLAN, a separate network inside the same switch. If a gateway falls, the ERP does not.

Who patches the plant gateway at 2 a.m. Mexico time

The patch headquarters cannot install Servers get patched remotely. The gateway on the line needs someone on the plant floor, with a badge, during production hours.

If your IT team sits in Madrid, Chicago or Toronto and the plant is in Querétaro or Monterrey, this is the real question. Headquarters can patch servers remotely. The Siemens gateway on the production line needs someone to walk in, update it and confirm the sensors still report.

That someone has to be in Mexico, on plant hours, with clearance to enter. Read how to get IT smart hands in Mexico.

ProcessBi technician checking equipment at a plant in Mexico
Tell us what is exposed and we will check it with you Foto: Pexels

And at your Mexico operation?

Do the quick count: how many Linux servers, how many NAS units, the firewall, the phone system, the cameras and the plant gateways. Then ask who will patch them and when.

At ProcessBi plans with an SLA include scheduled patching of Linux servers and Milesight gateways, plus on-site review of industrial equipment. You get a report in English of what was updated and what is still waiting on firmware, with invoicing in MXN or USD.

Book your free assessment — we reply the same business day.

Your path

Running IT in Mexico from abroad

68 of 89
  1. Protect laptops ✓ Read You are here 4 min
  2. AI picks victims ✓ Read You are here 4 min
  3. Patch Linux today ✓ Read You are here 4 min
  4. Zyxel/D-Link switches ✓ Read You are here 3 min
  5. Patch today ✓ Read You are here 3 min
  6. Vendor access ✓ Read You are here 3 min
  7. 23H2 Enterprise ends ✓ Read You are here 3 min
  8. Field services →
Next Zero-days in Zyxel GS1900 switches (the patch does not stop them) and D-Link DGS-3130: what to check today on the network of your Mexico operation