← Back to blog Networking

A misconfigured router grounded US flights: how to make network changes at your Mexico operation without taking it down

3 min read

On November 15, with flights still being cancelled across the US, the explanation shifted from “possible cyberattack” to something far more ordinary: a newly installed, misconfigured router.

Early reports pointed to equipment installed by L3Harris and a possible attack, which the US government denied, as El Siglo de Torreón and LatinUS reported. Then a r/sysadmin thread that made the rounds among admins pointed to a new HPE Juniper router opening a thousand connections every 4 to 5 seconds until the network choked.

1,000 connections opened by the misconfigured router in each burst
4–5 s between bursts, until the network was saturated

What happened and why it matters for your Mexico site

In our experience, the longest outages are not caused by hackers. They come from a “quick” change on a Friday at 6 p.m.

For a foreign company with a plant or warehouse in Mexico, the risk is often higher. HQ pushes a change remotely, the local ISP swaps a router, a contractor plugs a new switch into the rack. If the network is flat (everything talks to everything), one device going wild takes down the point of sale, the ERP and the cameras at once.

The FAA has budget and staff. If it happened to them, it can happen to a site in Querétaro managed from Texas.

Before touching anything: backup and a maintenance window

First, a snapshot of how it is Back up the configuration of every router, switch and firewall before changing a single line.

A configuration backup is a text file with everything the device is set to do. It takes a minute to export and saves hours if something goes wrong.

A maintenance window is the agreed time for the change: when the fewest people are working and someone is watching. In a three-shift plant that may be Sunday morning. Mind the time zone gap between HQ and Mexico, and keep it away from payroll or month-end close.

Test before you connect

On the bench, not in production A new device gets configured and watched in isolation before it touches the network that ships and sells.

A new device should not go straight into the production network. Configure it on the bench, power it up isolated, check that it behaves, then connect it.

StepWhat it doesWhat it prevents
Configuration backupSaves how everything wasRebuilding from memory
Maintenance windowChange at an agreed timeStopping sales or production
Isolated testSee the device before it joinsOne mistake spreading everywhere
Rollback planSteps to go backImprovising with everything down
Monitoring with alertsWarns when traffic spikesHearing it from a customer
DocumentationWho changed what and whenNobody knowing what moved

A rollback plan and monitoring that actually alerts

Let the network talk Monitoring watches traffic, CPU and outages, and alerts you before the plant manager calls HQ.

The rollback plan is simple: if it does not work within the agreed time, load the backup. In writing, with a named owner. No debates at midnight across two time zones.

Monitoring is what catches something like the FAA case: a device suddenly flooding the network. With SNMP (the protocol network devices use to report their status) and alerts by email or WhatsApp, you find out in minutes, not when shipping stops.

Segment by area so the damage stays contained

Each area in its own lane Office, cameras, production and guests kept apart: if one floods, the others keep running.

A VLAN is a separate logical network inside the same switch. Office in one, cameras in another, production in another, guest Wi-Fi on its own.

If something spikes on the camera VLAN, the registers keep working. We go deeper in how to separate guests, CCTV and IoT with VLANs. If nobody from HQ can be on site for the change, this is where IT smart hands in Mexico come in.

ProcessBi network cabling work in Mexico
Network changes get planned on paper before anyone touches the rack Foto: Pexels

What about your Mexico operation?

If you do not know when the router configuration at your Mexico site was last backed up, start there.

At ProcessBi we install networks and cabling with a procedure: backup, window, testing and documentation. With an IT support plan we monitor your network and send field technicians to your sites anywhere in Mexico, reporting in English.

Tell us about your network — we reply the same business day.

Your path

Running IT in Mexico from abroad

79 of 89
  1. HR data breach ✓ Read You are here 3 min
  2. IDE extensions ✓ Read You are here 3 min
  3. Network changes ✓ Read You are here 3 min
  4. WhatsApp with AI ✓ Read You are here 3 min
  5. AI phone agents ✓ Read You are here 3 min
  6. Which AI to pay ✓ Read You are here 4 min
  7. Safe Black Friday ✓ Read You are here 3 min
  8. Field services →
Next Automating WhatsApp with AI at your Mexico operation: what works, what it costs and how to keep your number from being banned